Halli Hallo my friends =). I'm back and even with 2 news =).
I made the sleeves cut or ready made and cut the muslin. Of course, everything documented and for you in word and image.
The cut is again made to "Miller & Son Munich" and the extent of the cut of the upper part taken - that is, Ah, circumferential, and SN are transmitted Ae =). I then compared the cut with a sleeve from a Burda, since the last time I had huge problems with a self-drawn sleeves - but the sleeves fit together almost exactly, that I should this time no problems = D! Anyway, here are the pictures for you.
durchgepauste The finished sleeves =).
compared with the Burda sleeve.
Düsseldorf * Q & A Round 3: How do I make a normal cut sleeves a puff?
No problem! This is simpler than what you think. First you once you considered what a puff you want? Should he be far from just above the ball? On the ball and the hem? Or only at the hem? Have you decided what type it should now be so characterized incision lines at right angles. I have 5 lines cut. Numbered the parts! That makes you work and you can not be wrong you. Then she puts on you as it should be puffy. I have given every 3 cm above and below it. I think that's okay. Refers to you the 3 cm (or whatever you like) and the cuts now put back on the fabric. (Each with 3 cm distance between them). Overall, we have therefore an extended 12 cm. Half - so you measure 6 cm from the center of the ball up. (Btw I'm only 4 because I think that's enough - this is based on experience, please test before) Then you draw the sleeve cap from new. Then just normal seam allowance (NZ) to and voila you have a puff. How do I explain it as processed then when the time comes. But for the really curious - 2x with 4 stitches without stitch sew the long fibers contract so that the fabric curls up and move to the desired width. Ready =).
Oh! I would recommend you - take more pins! Particularly if their initial page, so everything plugged firmly in place. I work at the cutting of very little more pins - I would recommend but only if it has become routine in it =).
Sooo now the cutting of the remaining parts, each with 2 inch seam allowance, except for length since I have 4 at the armhole and 1.5. (Accordingly, at the sleeve cap only 1.5). Yes - in fact you should press fabrics before - but since this is a sample part, I have left out the ... yes I'm bad ...;.
Soo is then cut and all-cycled. You cycle with a Kopierrad. What do you need anything? A smooth surface - but puts you in a box, because otherwise you scratched the table, a paper (!) - Is I used yellow because the white substance XD - according to the fabric in yellow or white. Well nurnoch then copy the wheel and off you go.
And then we see from the back - yellow dots ^ ^. Then I was
motivated enough to the VM (front center) - RM (center back) durchzuheften and the line for the lacing by hand. This helps when trying (the VM), the RM is required so that you know where you have to stick together and help me personally Schnürungslinie then see how it will look like - whether the Schnürlücke Sun okay for me. Because there can change everything, and yes, this line helps me then to see whether I like it =).
0 comments:
Post a Comment